Audio capture

From User Manual :: Screenbits
Revision as of 17:25, 15 July 2021 by Mchehraz (talk | contribs)
Jump to: navigation, search

Screenbits captures audio from output and input audio devices. You can capture audio either individually in audio capture mode or add it to the captured video when using other capture modes.

Input and output audio

Screenbits uses general terms for the audio sources which it can capture.

The term output audio refers to the audio which is generated by the system and provided to an external device. This is usually the system sound which you can hear from speakers or headphones. In contrast, input audio refers to the audio generated by an external device, usually a microphone, and is provided as an input to the system.

Audio capture mode

In audio capture mode, audio devices are the only capture source so the output only contains audio, and recorder produces audio files.

  1. From the application window, click Audio button under Mode section.
  2. Under Source section, enable at least one of the input or audio devices to capture.
Figure 1: Audio Capture (Audio capture mode)


Notes

  • You can manually choose a specific device to capture rather than the default device.

Other capture modes

To capture audio in a capture mode other that audio capture mode:

  1. From the application window, under Options section, turn Output audio or Input audio switch on.
Figure 2: Audio capture (Screen capture mode)


Volume

Screenbits uses system volume settings to capture audio devices. You can use Settings app to change volume for output and input audio:

  1. Click Start to open Start Menu.
  2. Click Settings to open Settings app.
  3. Click System to open System settings.
  4. Click Sound to change sound settings.
Figure 3: System sound settings


Supported formats

Screenbits supports devices with the following audio formats to capture:

  • 8kHz, 11.025kHz, 16kHz, 22.05kHz, 24kHz, 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz sample rates
  • 1 (mono), 2 (stereo), 4, 6 and 8 channels
  • 16, 24 and 32 bits per sample

If you attempt to capture an audio device with an unsupported format, an error message pops up asking you to select a different format for the device.

To change the default format of an audio device:

  1. Click Start to open Start Menu.
  2. Click Settings to open Settings app.
  3. Click System to open System settings.
  4. Click Sound to change sound settings.
  5. Click Sound Control panel under Related Settings to open Sound control panel.
  6. Right click on name of the device in list under Playback or Recording tab and click Properties.
  7. From Default Format section under the Advanced Tab select one of the supported formats above.
  8. Click OK to apply changes to the device properties
Figure 4: Audio Format - Sound settings