*You can select the device to record if you do not want to record the default device.
*List of the devices may vary depending on your hardware.
== Supported formats ==
Screenbits supports recording the following audio formats for the input:
* 8kHz, 11.025kHz, 16kHz, 22.05kHz, 24kHz, 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz sample rates
* 1 (mono), 2 (stereo), 4, 6 and 8 channels
* 16, 24 and 32 bits per sample
If you attempt to record an audio device with an unsupported format, an error message pops up asking you to select a different format for the device.
To change the default format of an audio device:
#Select '''Settings''' from '''Menu''' to open ''Settings''.
#From ''Input'' section under the ''Audio'' tab, click '''Configure''' to open ''Sound'' control panel.
#Right click on name of the device in list under the ''Playback'' or ''Recording'' tab and click '''Properties'''.
#From ''Default Format'' section under the ''Advanced Tab'' select one of the supported formats above.
#Click '''OK''' to apply changes to the device properties
[[File:Audio-format.png|frame|left|Figure 2: Audio Format - Sound settings]]
<br clear=all>